Posted inLogging How To Cut a Leaning Tree in the Opposite Direction? If you are someone who works as a woodworker, then cutting falling trees is also a part of… Posted by Ali Ahsanul Karim November 22, 2022
Posted inLogging 303 Hydraulic Oil Vs AW 32: Which Is Better To Choose You should buy good hydraulic oil for your hydraulic equipment like tractors or equipment construction. But, do you… Posted by Ali Ahsanul Karim November 21, 2022
Posted inFinish Polyurethane Vs Oil Finish: Which One Is Best For You? The most hyped wood finish, Polyurethane, and oil make you fall into a dilemma while choosing between them.… Posted by Ali Ahsanul Karim November 15, 2022
Posted inFinish What Finish To Use For Wooden Coasters: An Easy Guide Wooden coasters are available in many designs. They are very aesthetic to look at too. But all wooden… Posted by Ali Ahsanul Karim October 27, 2022
Posted inFinish How To Seal Creosote Lumber? 3 Easy Steps You might be thinking of using pieces of lumbers that were once treated with creosote. But you’re worried… Posted by Ali Ahsanul Karim October 24, 2022
Posted inWoodworking How Much Weight Can A French Cleat Hold? [Ultimate Guide!] French cleats can save a lot of time and space. It’s also super strong. But there are multiple… Posted by Ali Ahsanul Karim October 23, 2022
Posted inWoodworking Jack Plane vs Smoothing Plane: Which One To Pick? Are you confused about what differentiates a Jack Plane from a Smoothing Plane? Don't worry; we're here to… Posted by Ali Ahsanul Karim October 3, 2022
Posted inWoodworking LedgerLOK Vs TimberLOK Fasteners: Which One to Pick Are you juggling between LedgerLOK Vs TimberLOK Fasteners? LedgerLOK screws are like its name and are suitable for… Posted by Ali Ahsanul Karim October 1, 2022
Posted inFinish How To Get Rid Of Wood Stain Smell On Furniture? We often use wood stains on our tables, bedposts or frames, wooden decks, etc. Wood stain provides a… Posted by Ali Ahsanul Karim September 23, 2022
Posted inLogging 40:1 vs 50:1: Which Is The Better Option for Engine? Everyone knows that your engine won't run very well if you don't use the right oil. Mixing the… Posted by Ali Ahsanul Karim September 19, 2022
Posted inWoodworking Ledger Locks Vs. Lag Bolts: What Should Be Your Pick? Ledger locks and lag bolts are the most common items for woodwork. As both are screws and pretty… Posted by Ali Ahsanul Karim September 19, 2022
Posted inFinish Can You Put Polyurethane Over Polycrylic (10 Simple Steps) While making your wooden furniture, you might not achieve your expected finish from Polycyclic. So you may want… Posted by Ali Ahsanul Karim September 4, 2022
Posted inFinish How To Seal Sharpie On Wood? – 10 Methods To Try Did you try to draw to a wooden surface with your sharpie markers? And you are so amazed… Posted by Ali Ahsanul Karim August 28, 2022
Posted inFinish How To Fix Blotchy Gel Stain? 3 Simple Steps You’ve just finished varnishing on your wooden surface. Now, you’re trying to stain your bare wood. But you… Posted by Ali Ahsanul Karim August 27, 2022
Posted inWoodworking How To Install Lag Bolts Into Studs?- Here’s The Solution! Are you having a hard time installing your lag bolts? Even if you can install one, it sometimes… Posted by Ali Ahsanul Karim August 27, 2022
Posted inFinish How To Dye Wood All The Way Through [4 Steps to Fine Dyed] Even if you try to cover all the way through, it’s not settling with the wood. Well, you’re… Posted by Ali Ahsanul Karim August 26, 2022
Posted inWoodworking Does Hot Glue Work On Wood? [Ultimate Guide!] Hot glue is a kind of glue that consists of thermoplastic polymers. That is often sold as solid… Posted by Ali Ahsanul Karim August 26, 2022
Posted inFinish How To Fix Uneven Polyurethane Finish: 3 Easy Steps Polyurethane finish turning uneven is a really common problem. This issue affects your furniture's appearance, which isn't welcome… Posted by Ali Ahsanul Karim August 24, 2022
Posted inFinish How to Cut Burl Wood? [4 Step Guide] A burl is an attractive, superfluous growth on a tree. These valuable wood pieces can be used to… Posted by Ali Ahsanul Karim August 24, 2022