![How Can You Easily Thin Shellac? [In 3 Easy Steps]](https://woodpander.com/wp-content/uploads/2021/08/how-to-thin-shellac.jpg)
You have tried refurbishing your old furniture with your Shellac. But, it’s not sealing your wood properly. This is what happens when your shellac doesn’t keep up its natural consistency. That’s when you should thin your shellac. So, how to thin shellac? Alcohol is the key ingredient to thin shellac. Methanol and ethanol are the…
Polyurethane finish turning uneven is a really common problem. This issue affects your furniture’s appearance, which isn’t welcome at all. But doing nothing won’t solve your issue. So, how to fix an uneven polyurethane finish properly? First, use fine-grit sandpaper to sand the uneven finish. Don’t try to sand aggressively. This may sand through the…
![How To Finish Burl Wood? [4 Step Guide]](https://woodpander.com/wp-content/uploads/2021/08/How-To-Finish-Burl-Wood.jpg)
A burl is an attractive, superfluous growth on a tree. These valuable wood pieces can be used to make lots of things. For example, you can make veneers, furniture, artwork, bowls, and even wood watches with it. Now, you might be wondering how to finish burl wood? Finishing burl wood can be done only by…
Plywood is a versatile material that can be used for a variety of purposes. Now, you might want to make some furniture or anything with plywoods. In that case, you must have knowledge of how to work with plywood. So, you must be thinking about how to fasten plywood together. You can use finger joints…
You might have just finished your grouting. However, you would like to coat the grout with water based polyurethane. But you think it’s quite dense. So, your concern is, how to thin water based polyurethane? First of all, you can try thinning with Floetrol. Besides that, you would also like to try on paint thinner….
Using a table over the years can cause warp to the tabletop. It may take all your attention toward its warped situation. Plus a moving tabletop is really annoying. So, your concern now is, how to flatten warped wood table top? Firstly, you can flatten the warp through ironing. This includes placing wet towels over…
Among the wood sealers, Anchorseal is one of the famous names. But as Anchorseal 2 comes into the market, it is pretty confusing what’s the difference between Anchorseal Vs Anchorseal 2. The main difference between the two is that Anchorseal 2 is an eco-friendly option, whereas the original Anchorseal doesn’t have eco-friendly features. On the…
Too much sheen in woodwork might not always do justice to its appearance. Maybe it would have looked better if it was less glossy. So, how to dull a glossy finish? To dull a glossy finish, you can try the sanding and polishing technique. For that, first, sand the surface to remove the sheen. Then…
Woodworking activities demand a good adhesive and thus you can easily get in a dilemma between different types of wood glues. However, Aliphatic and PVA glues share many similar factors that you might wonder what’s the exact difference between Aliphatic vs PVA. Or can they be substitutes for each other? Aliphatic glue and PVA differ…
Adhesive is more or less your daily necessity, especially when you’re working professionally. You might get confused between wood glue vs construction adhesive and wonder if they are both the same thing or not. So which one should you choose, wood glue vs construction adhesive? The primary difference between wood glue and construction adhesive is…
No doubt, Laguna and Rikon are the two most reputable names in the woodworking industries. Among their product line, it might seem that the specs and features of Laguna 14/12 and Rikon 10-326 are quite similar. So you might get confused to choose between Laguna 14/12 vs. Rikon 10-326 for your woodcutting business. Well, the…
Being the top-quality saw brand, Bora and Kreg are famous names among woodworkers. Though both are used for quite similar purposes, in the end, you’ve to choose the most suitable one for your requirements. So which one is most suitable for you between the Bora vs Kreg saw guide? Bora saw guide uses high-duty aluminum…
Using a proper oil mix ratio is very important for the engine. Because mixing too much oil can cause failure to burn gasoline properly. Otherwise, if you don’t use the right amount of oil, it’ll wear the engine out. So how do you know which oil mixture will be best for you to use, 50:1…
Laguna manufactures different types of band saws for different woodcutting purposes. Since, among the Laguna bandsaw lineup, Laguna 14bx and 18bx shares some similarities and dissimilarities that you might be confused about which one to choose between Laguna 14bx vs Laguna 18bx. The Laguna 18bx and 14bx both are bandsaw from the same brand and…
When you start your woodshop or you often do some DIY carpeting project, a band saw is a great addition for this purpose. However, since many options exist, you have the challenge of picking a reliable brand. And when it comes to Laguna Vs. Harvey band saw, you might not know where to start, as…
