Bora VS Kreg Saw Guide Head To Head Comparison

Being the top-quality saw brand, Bora and Kreg are famous names among woodworkers. Though both are used for quite similar purposes, in the end, you’ve to choose the most suitable one for your requirements. 

So which one is most suitable for you between the Bora vs Kreg saw guide? 

Bora saw guide uses high-duty aluminum in its material. It offers a longer track to easily cut longer pieces of wooden shits. But the downside is Bora offers less grip and stability compared to Kreg. Besides, Kreg is also made from robust aluminum, easy to use, but lightweight. Though, it comes at a cheap price.

That’s not all. Here are more detailed comparisons between the two saw guides so that you can identify which one you’re looking for. 

Table of Contents

Key Comparison Table of Bora Vs Kreg Saw Guide

Take a quick look at this comparison table so that you get an instant idea about the key differences between both saw guides. 

MaterialHeavy-duty rigid aluminum Aluminum
Length50″-100″24″- 48″
Splinter ReductionLess resistant to splinteringSplintering resistant 
Weight & portability Lightweight and portableHeavier and less portable 
Clamps Single clampNo clamps use anti-slip guide strips
Grip & Stability Weaker grip & less stablePrecise grip & good stability
Best ForLarge project operationSmall project 

See Also: Laguna 14bx Vs 18bx.

What Is Bora Saw Guide?

bora saw guide

Bora saw guide is the perfect addition to your toolbox. It allows you to make straight and accurate cuts with a circular saw. It saves extra cost for buying a dedicated track saw or table saw. 


  • Compatible with different types of power tools
  • Very long to provide precise continuous cutting
  • Easy adjustability from one side


  • Might be too long for DIYers or hobbyist woodworkers

Bora Saw Guide Products

  • NGX Clamp Edge System
  • WTX Clamp Edge System

See Also:303 Hydraulic Oil Vs AW 32.

What Is Kreg Saw Guide?

Kreg Saw Guide

Kreg saw guide turns a circular saw into a precision edge-cutting tool that makes accurate, straight, repeatable cuts in plywood, larger sheets, and MDF. 

See also  Laguna 14bx Vs 18bx: Which One To Choose And Why


  • Best for cutting engineered wood and aluminum 
  • Compact and portable
  • 90-day warranty period


  • Comes with a plastic locking clamp 

Kreg Saw Guide Products

  1. Crosscut Station
  2. Portable Crosscut
  3. Straight Edge Guide
  4. Accu-Cut
  5. Rip-Cut

Detail Comparison Between Bora vs Kreg Saw Guide

Bora vs Kreg Saw Guide

Learning the differences between Bora and Kreg in detail will help you to get a precise idea of how the saw guides differ from each other. Plus, which one can meet your requirements? Let’s dive into the comprehensive comparison.

1. Material

The good the metal of the saw guide is heavy and robust, the better it can withstand long activities and heavy workloads. If you’ve to deal with high-intensity tasks, look for the saw guide made with heavy metal and can complete your task easily.

  • Bora Saw Guide

Bora saw guide is made from heavy-gauge, robust Aluminum material. Certainly, its superior build quality and sturdiness are enough for handling heavy-duty tasks. Along with extremely durable material, it is equipped with rubberized clamp pads. 

These rubberized clamp pads prevent potential scraping so that your workpiece remains safe. However, if you want to make sure of extra protection, we recommend using quality tung oil on the wooden shit.

  • Kreg Saw Guide

Kreg saw guides also used aluminum in their building material, but they are lightweight and not highly robust. It comes with a plastic saw sled that only weighs 2.44 lbs. So Kreg saw guide is definitely good for lighter tasks than you expect from Bora saw guide. 

2. Length

Length is one of the most crucial factors in a saw guide as it determines whether it’s suitable for the scale of operation. Professional woodworkers mostly seek larger saw guides. On the contrary, if you operate on a smaller scale, a shorter length will be much more suitable for the task.

  • Bora Saw Guide

Bora saw guides come in different types of lengths. For instance, Bora’s most popular saw guide- the WTX Clamp Edge comes with a 50″ cutting length. But amazingly, you can attach a 25″ or 50″ extension with it if needed. Adding extensions, you’ll get extra cutting capacity up to 100 inches wide guides.

Connecting extensions help you to rip or crosscut an MDF or full sheet of plywood. No wonder using extensions will save you lots of time and you can cut multiple boards together at the same time with them. However, if you’re an everyday DIY home improver, 100″ inch length will be unnecessarily long for you. Here you don’t need to connect the extension.

  • Kreg Saw Guide
See also  Husqvarna Chainsaw 455 Rancher Problems & Solutions

On the contrary, Kreg saw guide comes with two separate sections of track. Each section has a 24-inch length-simply good for smaller projects.

Though you can increase the small track length by connecting two halves up to 48″. So you’ll get more surface area for roaming with the saw.  If you want some additional cutting range, consider using an extension guide that’ll help you cut large sheets of wood without hassle.

Kreg’s cutting length absolutely be the right choice if you’re not a professional woodworker, have a shortage of space, or are dealing with a tight budget.

3. Grip & Stability

Another key factor to consider in a saw guide between Bora and Kreg is its grip and stability. Because grip and stability play crucial roles in determining the precision, quality, and straightness of your cutting lines. In simple words, the more gripping or stable your saw guide, the better control you’ll get from it. 

The gripping ability is completely responsible for keeping the guide locked in place during your operation.

  • Bora Saw Guide

Bora saw guide comes with fairly good stability and grip. Though unfortunately, they’re less than compared to the Kreg saw guide. 

For example, Bora WTX just locks on one end. That’s why its single clamp is unable to hold the long track firmly in place. As a result, it seems majorly problematic for long cuts because the saw tends to divert a few degrees off-axis. In that case, you might want to use a shoulder plane to scrape off the extra bits of wood.

  • Kreg Saw Guide

Contrarily, the Kreg saw guide features better grip and stability in comparison to Bora. Its guide rail prevents splintering.

Otherwise, as Kreg saw guide has a smaller track, the track doesn’t require any clamps, rather their anti-slip guide strips allow the guide to keep a firm hold over the surface.

On top-notch, the smaller length of track ensures that it does not have a flimsy track. Kreg allows you to cut even or equilateral triangles off the wood. 

See Also: 40:1 vs 50:1.

What’s the difference between a track saw and a circular saw?

Track saws enable you with three separate cuts. On the other side, circular saws perform double cuts. Nevertheless, circular saws come with a protective guard whereas track saw doesn’t have any protective guard.

See also  How to Preserve Wood Slices with Bark?

Is a guide rail compatible with a circular saw?

Yes. A guide rail is compatible with a circular saw to provide more accurate cuts. In a calculated way, a guide rail helps to control the trajectory of a circular saw.

Can a Circular Saw be used as a track saw?

Yes. Modifying your circular saw, you can use it as a track saw. If you want long cuts, add extensions to your circular saw and easily finish your job.

What is the difference between the Bora WTX and the NGX system?

The main difference between Bora WTX and the NGX system is that the NGX has the ability to be clamped from one side.  Moreover, the NGX is able to work with Bora’s new saw plate and non-chip strips. 

Which one is the best straight edge clamps?

The best straight edge clamps would depend on your specific needs and budget. Popular options include Bora 50″ WTX Clamp Edge and Irwin Tools Quick-Grip Clamp Edge, both known for their durability and reliable performance. Consider the length, features, and customer reviews to find the one that suits your woodworking or DIY projects the most.

Bora vs Kreg Saw Guide: Which Is Better?

After deep research, we learned that both the saw guides have their advantages and drawbacks. In that case, you first know your requirements and should focus on the key factors that can fulfill your requirements. 

Speaking about Bora, it’s a perfect choice for professional woodworkers who mostly cut large sheets of wood and tabletops. Along with perfect long cuts, they are impressively durable and sturdy enough to withstand heavy workloads. Though Bora is the perfect choice for heavy-duty tasks, it has a higher price tag.

On the other hand, Kreg is much affordable as well as durable enough for low-budget woodworkers. Kreg saw guides are lightweight and small in size, which makes them portable and can easily fit in small spaces. On top, it provides better gripping and stability compared to Bora. So you can ensure accurate, precise woodcutting with this guide. If you’re a hobbyist woodworker or operate small projects, Kreg guide saws will be your best choice. 

Parting Words

We reached the last few words of our article. Hopefully, you already learned the major differences between Bora and Kreg saw guide and realized which one would be your best companion. Now it’s your time to choose the saw guide that fits your requirements. No need to hurry, take your time and make your investment worthwhile. 

If you find this article helpful, share it with your friends and comment below if you have any inquiries. 

Best of luck!